Interconnectivity
PDIUSBD12 Evaluation Board (PC Kit) User’s Manual
Page 5 of 14
REV. 2.1
Installation
Jumper’s setting on PDIUSBD12 ISA bridging board
The PDIUSBD12 ISA bridging board is plugged inside the device PC. It will occupy I/O, IRQ and DMA
resources of the device PC. To avoid possible conflicts in settings, we suggest removal of all the
unnecessary cards from the device PC. Sound card and network card may cause conflict in IRQ and
DMA setting.
J2
ON
1
8
S1
JP5 JP6
JP1 JP2
JP3 JP4
Switch S1 sets the base I/O address for the D12 evaluation board. Default base address is 0x368.
The D12 evaluation board occupies 8 I/O locations. A0 to A2 are decoded on the D12 evaluation
board. Switch S1 sets the address decoding of A3 to A9. Please notice that a switch ‘ON’ is logic ‘0’.
SW(n)
Address
Default
1
X
OFF
2
A3
OFF
3
A4
ON
4
A5
OFF
5
A6
OFF
6
A7
ON
7
A8
OFF
8
A9
OFF
Jumpers JP1 and JP2 set the IRQ number for the D12 evaluation board. Default setting is IRQ5 or
JP1 is shorted.
IRQ Number
Jumper’s Setting
Default
IRQ5
JP1
ON
IRQ7
JP2
OFF
Jumpers JP3 to JP6 set the DMA number for the D12 evaluation board. Default setting is DMA3 or
JP4 and JP6 are shorted. Please note that a respective pair of jumpers is needed to set a particular
DMA channel.
DMA Number
Jumper’s Setting
Default
DMA1
JP3, JP5
OFF, OFF
DMA3
JP4, JP6
ON, ON
_______________________________________________________________________________________________
Philips Semiconductors - Asia Product Innovation Centre
Visit http://www.flexiusb.com
相关PDF资料
D13W3S17B5GX3CLF CONN DSUB COMBO SKT 13W3 RA PCB
D15P13A6PV00LF CONN DSUB PLUG 15POS T/H RA GOLD
D15P13B6UX00LF CONN DSUB PLUG 15POS T/H RA GOLD
D15P33E4GV00LF CONN DSUB PLUG 15POS R/A PCB SLD
D15P33E4GX00LF CONN DSUB PLUG 15POS R/A PCB SLD
D15P33E4PA00LF CONN DSUB PLUG 15POS T/H RA GOLD
D15P33E6RV09LF CONN DSUB PLUG 15POS T/H RA GOLD
D15P33E6RV12LF CONN DSUB PLUG 15POS T/H RA GOLD
相关代理商/技术参数
D12/CRCW0805 制造商:Vishay BCcomponents 功能描述:Bulk
D12/CRCW0805 0R ET1 E3 制造商:Vishay 功能描述:Zerohm 0805 Jumber